| Detailed Product DescriptionLC20 levels the TBN, reduces oxidation, provides an extra measure of lubricity, provides extra rust control, and will literally melt (soften and emulsify) carbonaceous deposits. It then places these carbonaceous deposits into the oil solution. LC20 keeps your oil in good condition and reduces oxidation so well that oil change intervals can be extended. We recommend changing oil at 10,000 miles when adding LC20 every 1,000 miles. LC20 can also be used as a cylinder preparatory storage oil (squirted into the individual cylinder) in automotive and small engines to clean carbon deposits and keep rings and cylinders from rusting during storage. 2-cycle and 4-cycle engines that have stuck rings can be unstuck with LC20. LC20 works with all forms of motor oils, including synthetic, and has a variety of uses such as end of season storage, removing carbon and varnish, and pre-conditioning the rings before startup. This product will also enhance hydraulic systems, as proven in a report preformed by Dysons Analysis. The recommended treatment rate of LC for engine lubes in 4-cycle gasoline or diesel engines is 1 0z./Quart for the initial dose, and 1-2 oz. every 1,000 miles or 1,610 km. Do not overfill crankcase | 
