# Material:PVC # Size:0.3*10M # Application:Auto / Automobile /Car/ Car Body / Automotive / Car Exterior / Car Interior # Thickness:160um # Available Color:Black,White,Red,Blue,Silver,Golden # Key Words:3D Carbon Fiber Film/Carbon Fibre Vinyl Wrap/Carbon Fiber Vinyl Car Wrap Bright Red Car Headlight Tint Vinyl Film 0.3*10m Red Headlight Tint Vinyl ---- Place of Origin: | Guangdong, China (Mainland) | Brand Name: | DEREK | Model Number: | QD3106 | Color: | Red Headlight Tint Vinyl | Thickness | 0.19mm | Size | 0.3*10M/roll | Materials | PVC | With air Free bubbles | Without | ---- The light will not be influenced at all, the film has a high light transmittance. There are many colors, so you can change it easily. Protect the car-light against scrape, water, UV, dust, etc. Raw Materials # PVC:160um Flexible Monomeric PVC Film # PE: Top surface protective layer 30um # Glue: Import Pressure Sensitive Adhesive 40um # Release Paper: PET 50um Characteristics # Much more durable: Excellent duration to the environment, non-yellowing, 3-4 years longevity. # Isolate from corrosion: Can resist persistent damages caused by most of the oil, grease, fuels, fat solvent, weak acid, weak bases. Keep your cars completely away from acid rain, gravel, birds droppings and oil and fat. # Anti-friction and Anti-scratch: Superior toughness makes restoring force increase by more than 10 times. # Excellent filter: Refract and filter harmful lights. Keeping the harm caused by strong light and UV from your car. Protect the glossiness of original paint and durability. # Make the maintainance convenient : Save money spent on washing and waxing your car # Without glue left: Can be sticked or removed at will without damaging the paint of your car light. # Super environmental protection: Harmless to paint, human body and nature Car headlight film install step: Materials and tools neededCar lights protection film, A spray bottle filled with water, A bottle of detergent, A scraper, A hot glue gun, A knife, A piece of dishcloth Person needed1-2 person Time needed30-40 minutes Work Procedures 1. Cut the light protection film into pieces according to light sizes of your car. The length of the film cutted must be 5cm longer than your light in order to be convenient to stick. 2. Clean the surface of your car light with the wet dishcloth 3. Spray little water onto the light 4. Spread the film and then spray little water onto it too 5. Straighten out the film and stick it onto the light 6. Using the scraper to smooth the surface of the film 7. Using the hot glue gun to dry the film sticked, which is more effective to those arc areas. 8. Using the scraper to smooth the surface of those arc areas 9. Trim off the extra edge of the film around the light 10. Well done! Having fun of pasting your car with colors! Specifications ---- Item NO. | Color | PVC Thickness | Removable Glue | Release Paper | Width | Length | Outdoor Durability | QD3106 | Bright Red | 160um | 40um | 50um | 0.3m | 10m | 3-4 years | ----
