16*6W LED RGB Wireless DMX LED Par Light LED Par Cans For P

16 6W LED RGB Wireless DMX LED Par Light LED Par Cans For Party Quick Detail: 16 LED 3IN1 6W DMX512, Master/Slave, Auto Run,Sound Activated,2.4GHz Wireless DMX Optional CE,RoHS Specifications: ---- Model Name: | 16 LED 3IN1 6W Wireless DMX LED Par Light | Model No.: | YL-PAR-16-6TC-D1 | Working Voltage: | 100-240V AC 50-60Hz | Light Source: | 16 LED 3IN1 6W | Max. Power: | 96 W | Beam Angle: | 25 or 40 degree | IP Rating | IP65 | DMX Channels: | 3 or 5 Channels | Control mode: | DMX512, Master/Slave, Auto Run,Sound Activated, 2.4GHz Wireless DMX Optional | Certification | CE,RoHS | Dimensions: | 20cm X 20cm X19cm | Net Weight:: | 5Kg | ---- Description: Full color dimming: 255 grade brightness tunning, sound activation Full color Jumping change: Red, Green, Blue and White color jumping in turns, 255 grade speed control, sound activation 15 color jumping change: 255 grade speed control, sound activation Multicolor graduating change: 255 grade speed control, sound activation Multicolor strobe: 7 colors strobe in turns, 255 grade speed control, sound activation. Auto Run, Built-in programme circulation Master/Slave: Multiple units linked, slave changes with master synchronizingly. DMX dimming: Different units are assigned their own DMX address, their outputs are changing with the data of the DMX controller. Operation Panel: 1-Working Mode Switch 2- LCD Cursor Moving Key, Flashing Position is the parameter to be revised 3- Data Up 4- Data Down 5- LCD Display 6- Wireless DMX Indicator 7- DMX Signal Indicator 8- Sound Activation Indicator Function Setup # Built-in Function Setup Press SETUP key to switch among all sub-function key, speed, sound button, etc. Cursor flashing position is the parameter to be revised. Press UP or DOWN to adjust the data. It can be master unit. For example: LCD displays"4.FADE S010 A:N" 4.FADE: NO.4 function, Fade S010: Speed value 10 A:N: Sound Activation closed # AUTO RUN Auto Run the combination function of all sub-functions, it can be the master unit, set the Sound Activation parameter to be "N" to close the Sound Activation Mode of the sub-function. # DMX Address Setup: Address Range: 1-512, Press UP to setup address upward and DOWN to setup address downward. There are two DMX channels for your choices: DMX 3CH & DMX 5CH: DMX 3CH Mode: CH1:0-255 Red Dimming Range CH2:0-255 Green Dimming Range CH3:0-255 Blue Dimming Range DMX 5CH Mode: CH1:0-255 Red Dimming Range CH2:0-255 Green Dimming Range CH3:0-255 Blue Dimming Range CH4:R, G, B, W, A, U General Dimming CH5:Strobe Speed # Slave Mode Choose Slave Mode, Synchronizing with Master Unit. # Wireless ID Setup Press SETUP, UP OR DOWN at present mode to display current ID, press again to setup new ID, ID value will be added 1 more by pressing one time, ID indicator color will change according one by one. Working Status: # LED constant light: Showing current ID, no DMX or wireless signal # RED LED flash: Transmitting # Green LED flash: Receiving ID code and LED color corresponding relationship: # 1:RED # 2:GREEN # 3:RED+GREED---------------Yellow # 4:BLUE # 5:RED+BLUE------------------Purple # 6:GREEN+BLUE--------------Cyan # 7:RED+GREED+BLUE------White Description for LED Indicators: RF-ID: Tricolor LED to indicate working status and ID code. SOUND: Sound Indicator, flash when signal is strong enough, no relationship with setup. DMX: DMX signal indicator, flash when there is DMX signal or connected with master unit.