1.5HPSelfPrimingCentrifugalPumpCentrifugalWaterPumpsWithBrassImpellerHFM-70 Quick Detail: 1.Good quality and best service 2.Two-pole induction motor 3.Insulation Class B 4.Protection IP44 5.Standard Packing Applications: Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rate. Suitable to pump clean water or non- aggressive liquid charged with small solid impurity. To be used in flow irrigation systems in gardening, agriculture and industrial fittings Operating Conditions: Liquid temperature up to 60C Ambient temperature up to 40C Total Suction lift up to 9mt Continuous duty Motor: Two-pole induction motor (n=2850r.p.m) Insulation Class B Protection IP44 Material: Pump body: Cast iron Motor support: Cast iron Motor housing: Aluminium Impeller: Brass Shaft with rotor: 45# Steel, AISI 416 stainless steel if request Mechanical seal: Carbon/Ceramic Single phase 220V-240V/50Hz Single phase 110V-127v/60Hz if request Single/threephase 220V/60Hz if request Specifications: ---- Model | Input Power | MAX. Flow L/Min | Max Head Meter | stator (cm) | inlet/ outlet | Impeller | Cable(m) | Wire | Packing size (mm) | Pcs/20FT | Kw | Hp | HFM-70 | 0.75 | 1 | 350 | 12 | 7X11 | 2"X2" | brass | 20cm | copper | 355X215X270 | 1200 | HFM-75 | 1.1 | 1.5 | 360 | 14 | 9X11 | 2"X2" | brass | 20cm | copper | 355X215X270 | 1200 | HFM-80 | 1.5 | 2 | 1000 | 14 | 9X12.8 | 3"X3" | brass | 20cm | copper | 445X265X340 | 600 | HFM-85 | 2.2 | 3 | 1100 | 18 | 11*13.5 | 3"X3" | brass | 20cm | copper | 445X265X340 | 600 | HFM-90 | 2.2 | 3 | 1300 | 16 | 11*13.5 | 4"X4" | brass | 20cm | copper | 465X305X370 | 500 | HFM-95 | 3 | 4 | 1500 | 20 | 13*13.5 | 4"X4" | brass | 20cm | copper | 510X300X360 | 450 | HFM-100 | 3 | 4 | 1300 | 22 | 13*13.5 | 3"X3" | brass | 20cm | copper | 490X300X360 | 450 | HFM-105 | 4 | 5.5 | 2000 | 22 | 12*15.5 | 4"X4" | brass | 20cm | copper | 545X300X360 | 400 | ---- Competitive Advantage: # # Centrigugal Pump with Euro plug # Hydraulic Pump # Electric Water Pump
