Model No. LP2000-P2
Range of pre-set of infusion rate 1-1000ml/h(1ml/h step)
Range of pre-set of infusion volume 1-9999ml
Indication range of volume infused 1-9999ml
Use of syringe Comply with all brands after calibration
Infusion precise ± 5%
Bubble sensitivity Detestability of air bubble ≥ 40UL
Occlusion alarm pressure 100KPa± 20KPa
Alarming Air Bubble, Occlusion, Door Open, Complete infusion, Low power, Motor failure, Drop abnormal, Low temperature, Pause overtime
KVO rate KVO rate as at 1ml/h with flow rate no higher than 10ml/h; As at 3 ml/h with flow rate higher than10ml/h
Internal battery Fully charged 6 hours, the internal DC12V Ni-MH battery can continuously run over 4 hours at average rate level.
Power 100-240VAC 50/60Hz
Power consumption 18VA
Working environment Operating Temperature 5~40
Atmospheric pressure 700 hPa~1060hPa
Relative Humidity 20%~90%
Classification Type BF, Class I continuous volumetric infusion pump with internal battery; IPXI (sealed drip-proof device)
Appearance size 165mm(length)× 120mm(width)× 210mm(height)
Weight 2.5kg
Accessories 1PC User's Manual, 1PC power cable
Service life 3 years
Warranty 18 months
Standards ISO13485 & CE & EN60601-1, EN60601-1-2, EN60601-2-24
