THR-S175 bi-rocker bed with chamber pot: Size: 2030× 960× 530mm-The headboards are made of cold steel pipe, electrostatic powder coated and baked. -The rockers are made of steel alloy, which can be folded. -The crank system has extreme position protecting designing. -The bedsurface is welded by bar iron, equiped with bed rails on the two sides of the bedframe as a whole, which can be lied down vertically. -The whole bedbody is treated by adid and electrostatic powder coated and baked. -One cross-bed table made of high density plywood is added as a accessory. -The bottom of the bedlegs are covered with protecting rubber. -The stool and chamber pot can be scretched out by operating the crank under the bedsurface. -The back panel can be lifted up from 0 ° To 70° (± 5° ), the foot panel can be lifted up from 0 ° To 30° (± 5° )-The bed are matched with mattress, which has the same function with the bed, made of anti-sliding and anti-water cloth. The product has been assessed and conforms to the following standards: GB/T 19001-2000 idt ISO 9001: 2000.
