Product type QY-SK-500IIMaximum injection rate 1500ml/h (Different injectors have different maximum rate. )Range of flow rate5ml injector: 0.1-100ml/h10ml injector: 0.1-200ml/h20ml injector: 0.1-400ml/h30ml injector: 0.1-600ml/h50ml injector: 0.1-1500ml/hInjection increment 0.1ml/hBolus rate5ml injector: 100ml/h10ml injector: 200ml/h20ml injector: 400ml/h30ml injector: 400-600ml/h50ml injector: 400-1500ml/hInjection mode selection1. Rate mode 2. Time mode 3. Body Weight modeRate mode Speed: 0.1-1500ml/h (maximum value depends on the injector specifications)Time mode Time: 1~2000 minutes Accumulated injection volume: 0.1-999.9mlBody Weight modeWeight: 0.1~300.0kgDrug: 0.1~999.9(mg)Volume: 0.1~999.9mlDose: 0.1~9999.9(restricted to unit, drug, solution, weight and injector specification). Unit: Mg/kg/h, ug/kg/minKVO rateAdjustable range: 0.1ml/h~5.0ml/h (begin the KVO function under the occlusion situation); Pressing STOP key to cancel the KVO function when it is unnecessary in use. IP grade IP21Injection pressure The maximum pressure is 0.3Mpa, Occlusion alarm pressure value is 40kPa~160kPa when pressure value is minimum, injection rate is 25ml/h, the longest alarm time is 10 minutes. When pressure value is minimum, injection rate is 5ml/h, the longest alarm time is 10 minutes. Preset volume 0.1ml-9999.9mlPreset time 0~99 hours, 0~59 minutesAccumulated injection volume 0.1ml-9999.9mlAccuracy ± 3%Power supply AC 100~220V, 50/60HzBattery Rechargeable lithium polymer battery, 7.4 V, 1600mAh. Maximum power consumption25VA, running more than 2 hours at the rate of 25ml/h after being fully charged. Battery chargeWhen syringe pump is connected to AC power, the battery will automatically recharge. (about 8~14 hours to recharge fully. ) Fuses T2AL250V~Displayed informationFlow rate; Accumulated injection volume; Injector specification; Battery capacity; Bed No.; AC power indicator, operation indication, etc. State indication informationStop, inject, bolus, KVO (stop flashing, the other indicators flash by turns. )Alarm informationNear completion, Over, occlusion, low battery, abnormal 1 (communications failure), abnormal 2 (pump stuck), abnormal 3 (wrong parameter), volume limited alarm, no AC powerMaximum size of the outer shell288× 130× 122 mm(length× Width× Height), Maximum weight <3.0kgClassification Class II, Type BFShell material ABS plasticOperating conditionsEnvironment temperature 5º C~40º C, air pressure 80kPa ~106kPa, relative humidity ≤ 80%Storage conditions Environment temperature -40º C~55º C, air pressure 50kPa ~106kPa, relative humidity ≤ 95%Applicable syringes5ml10 ml20 ml30ml50 ml syringes Electrical safety In accordance with the stipulation of GB9706.1-1995Applied standards According to the stipulation of YZB/Yue 001-2008
