Features
Automatic Changeover System
Fully enclosed, tamper-resistant metal cabinet.
Stainless steel diaphragm regulator ensures steady gas flow.
LED indicators provide system status ("IN USE"-green, "READY"-yellow, "EMPTY"-red).
Patent pending changeover technology.
Integral alarm. Remote alarm available.
Pipeline
Open-style manifold system, designed for future expansion needs
Silver brazing on piping joints for maximum leak prevention.
Unique changeover valve provides uninterrupted supply of gas from primary and reserve banks.
Easy Installation and maintenance.
Wall or floor mount available.
Specifications
BFM009-AG Series automatic manifold systems shall be manufactured by Genstar Technologies Co., Inc. In an ISO 13485 certified facility. The systems shall be compliant with NFPA 99, HTM 02-01 and ISO 7396.
The BFM009-AG changeover system includes two primary regulators, gas specific cylinder connections, and a single-point power connection. Nitrous oxide and carbon dioxide changeover systems include pre-wired heaters. The changeover system shall automatically switch to the reserve bank when the pressure in the primary bank falls to a predetermined level.
The BFM009-AG Series automatic manifold systems shall be able to operate without electrical power (except for the heaters for nitrous oxide and carbon dioxide systems). Electrical power is used only to light the signal indicators and operate the changeover alarms. In the event of a power failure, the system shall continue to supply gas without interruption.
Header bars shall be made of silver brazed, rigid, brass pipe and fittings.
Pigtails shall be gas-specific, complete with CGA nut and nipple inlet and outlet fitting. Reverse flow outlet check valve shall be optional. Pigtails for oxygen and nitrous oxide applications are of 24" or 36", semi-rigid copper. Pigtails for carbon dioxide, nitrogen, and medical air applications are of 24" or 36" flexible stainless steel.
The system shall be furnished with a separate power supply to convert 220/110 V to 24V output power.
Each manifold system shall be cleaned for oxygen service in strict accordance with CGA 4.1, and 100% factory tested for proper operation prior to shipment
