Tabletop Pulse OximeterParameters: Three Parameters: SpO2TEMP(Optional)Pulse Rate. Waveforms: SpO2 waveform-PLETHFeatures: 1. Compact, small, light, easy for carrying and handling; 2. LED display of measurement and LCD display of PLETH; 3. Audio and visual alarm; 4. Storage and review of patient's trend data up to 36 hours which is never lost even when power's off; 5. Three kinds of power supply, AC Power, Build-in rechargeable Ni/MH battery and Common AA alkaline or rechargeable batteries; 6. Battery capacity indicator; 7. Automatic power-off; 8. Patient's trend can be transmitted to a personal computer for display, saving and printing; 9. Suitable for adult, pediatric, and neonate patients; Applications: Table Pulse Oximeter can be applied in the hospital's operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment. Technical specification1. GeneralMonitoring Parameters: SpO2PRPLETHPulse strengthTEMP(Optional)Signal sockets: SpO2 socketPR socketTEMP socket(Optional)adaptor socketPC communication socketDisplay screen: Type: 128× 64 DOT matrix homochromy LCD and Dual-color LED (red/green)LCD Display area: 46mm× 32mmLED Display area: 35mm× 58mmBacklight color: WhiteLED: Dual-color LED (red/green) and homochromy LED2. FeaturesPLETH: The monitor can display PLETH waveformAudio and visual alarm: The speaker sounds the alarm and the parameter's measurement flashes on the screen. Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch. Power saving: The monitor will automatic shut down when no monitoring for 3 minutes. Trend: The monitor saves parameter measurements every 2 seconds and can store trend data up to 36 hours. Data storage: The saved data will never be lost even if the monitor is powered off. Communication: Transmitting the patient's trend to a PC for display, observation, saving and printing. 3. Electrical specificationsWorking Voltage: DC 6.0V~9.0VAC power adaptor Input: AC 100~240V, 50/60Hz, 0.7AOutput: DC 5V, 3AInternal battery Type: 1.5Ahr/8.4V Li rechargeable batteryRun Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25)Recharge time: 5 hoursCommon 1.5V BatteryType: Five pieces of common 1.5V AA battery or rechargeable batteryRun Time: More than 5-hour continuous operation with a new battery (environment temperature is 25)4. EnvironmentTemperatureOperation: 0° C ~ 45 ° C Transportation and storage: -20 ° C ~ 60 ° CHumidityOperation: 15% ~95 %(non-condensing) Transportation and storage: 10% ~ 95 % (non-condensing) AltitudeOperation: 86KPa~106KPaTransportation and storage: 50KPa~106KPa5. Parameter SpecificationsSpO2: Patient: Adult, child and neonateRange: 35%~100%Resolution: 1 %Accuracy: ± 2 %(70% ~100%), Unspecified (0%~ 69%)PR: Range: 30 bpm~250bpmResolution: 1bpmAccuracy: ± 2bpmTEMP(Optional): Channel: 1Input: Body surface thermal-sensitive resistor temperature sensorRange: 0~50Resolution: 0.1Accuracy ± 0.2 Company: Minmin Medical Instruments Co., Ltd.
