Parameters of Video Camera GPI-922 | ||
Image sensor | 1/2" non-interline CCD (PAL) | |
Sensitivity | F8, 3000K 700 lx | |
Minimum illumination | F1.4, 3000K,GAIN +12dB, Output level: About 50%3Lx | |
Signal to noise ratio (S/N) | 46dB(p-p)/rms | |
Resolution | 480lp/mm horizontal resolution | |
420lp/mm Vertical resolution | ||
Gamma | Initial setting for option | |
White balance (WB) | Automatic/ manual (initial set: manual) | |
Correction range | 2500K∼6000Kcorrection range: full screen | |
Automatic luminance control(ALC) | Automatic luminance control/ automatic gain control/manual control for option (initial setting: manual) | |
Automatic luminance setting | Correction range | |
Detection area: full screen/ brake (initial setting: full screen) | ||
Auto gain setting | Correction range | |
Inspecting area: full screen | ||
Manual setting | Electronic shutteradjustment with 8 steps | |
Gain control: 0dB/+6dB/+12dB selectable (factory setting: 0dB) | ||
Electronic shutteradjustment with 8 steps | ||
Contrast enhancement | Adjustment with 16 steps (initial setting:2) | |
camera | M15.5P0.5(male screw) | |
Power for camera driver | DC12V±10% pulsatile voltage: 50mV(p-p) | |
Power consumption | GPI9001(P) approximate 550mA | |
Camera weight | Approx. 16g | |
Weight of camera controller | Approx. 600g | |
Standard application | CE EMI:EN50081-1-1997 | FCCFCC Part15 subpart B Class A |