1. Characteristic: 1) Can be done the filling and stoppering in the same time, all the function can be auto-controlled computerized. 2) Eight menus for easy selection: No filling while no vial on the filling position, Auto alarms when the screw touched the surface of the funnel, etc. 3) There is only single column with double-screw, easy for cleaning and maintaining. 4) Easy to set and amend the parameters of the stepmotor, and choose to add opposite rotation if you need. 5) The screw is used with large diameter and large screw-pitch, solving the problem of filling viscous powder. 6) The parts needed cleaning oftentimes is used the easy teardown framework. 2. Applicable Range: 7c. C mould vial(φ25mm) 7c. C tubing vial(φ22mm) 10c. C mould vial(φ28mm) 100c. C mould vial(φ53mm) 3. Capacity Dosing 0.06-1.0gm 120vials/min Dosing 1.0-3.0gm 70-80vials/min Dosing 5.0g 30-40vials/min 4. Tolerance: Dosing 0.5-2.0gm+-2-4% Dosing(small) 150mg+-3-6% 5. Powder suitable: Crytalling powder, spray-drying powder, freezedrying powder, and powder with poor fluidity all can be filled. 6. Main Specifications: 1) Power: 1.8Kw, 380V 50Hz 2) Driving Pattern: Computerized controlling stepper motor 3) Stoppering operation: Stopper is picked up by vacuum and then insert into the vial mouth. Successful rate of stopper: 99.9%.
