This product is applied for the portable non-destructive inspection of steel wire ropes in maintenance.
Product Feature
For the nondestructive inspection of wire rope with diameter from 10-80mm
Detection environment regulated with M-Regulator.P;
Detection powered by WiSensor.P;
Portable detection of various flaw types including broken wires, corrosion, pitting, abrasion, fatigue, etc
Instant monitoring and evaluation of detection with integrated Keypad and Screen
Built-in signal processor for portable application - InfoBridge.P;
Built-in and PC software evaluating and reporting for portable application - T-Arithmatica.P;
Product Specification/Models
TS-X1124 for Rope Diameter 6-24mm
TS-X1142 for Rope Diameter 22-42mm
TS-X1160 for Rope Diameter 40-65mm
TS-X1160x for Rope Diameter 40-70mm
Application
Mining Hoist, Civil Cranes, Ropeways, Port Cranes, Offshore Wire Ropes, Dragline Shovel, other wire rope sites.
Other Information
Inspection Speed: 0 - 3 m/s (or as limited for Safe Operation)
Flaw Signals: Broken wire, Abrasion, Corrosion, Fatigue signals complying with Internationa Standards
Flaw Detection:
99% Accuracy of Quantitative detection for flaw (LF, LMA) > 8%
95% Accuracy of Quantitative detection for flaw (LF, LMA) < 8 %
100% Repeatability of severe flaw signals
98% Repeatability of overall detected flaw signals
Quantitative detection of internal flaws such as internal broken wires & fatigue
Quantitative detection of external flaws such as broken wire, abrasion & corrosion