Shandong Kaitai Industrial Technologies Co., Ltd
Model: G10、G12、G14、G16、G18、G25、G40、G50、G80、G120
Products Steel Grit Chemical Composition C 0.70~1.20% Mn 0.35~1.20% Si 0.40~1.20% S ≤0.05% P ≤0.05% Microhardness GP:42~50HRC (399~509HV) Hardness Deviation Max Deviation ±3.0HRC Microstructure Tempered Martensite or Sorbite Density 7.4g/cm3 Steel Grit Types: Application Devices:
In accordance with standards of GB/T18838.3-2008 Steel Shot and Steel Grit,SFSA20-66Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993High Carbon Steel Grit, YB/T5149-1993 Cast Steel Shot, YB/T5150-1993Cast Steel Grit,ISO11124-3High Carbon Cast Steel Shot and Grit.
GL:56~60HRC (620~713HV)
GH:63~66HRC (795~889HV)
Blast cleaning of cast steel grit:Used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, H type steel, steel structure.
Rust removal of cast steel grit:Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of?forging.
Shot blasting of cast steel grit:Shot blasting of profile steel, ship board, steel board, steel material.
Shot blasting of cast steel:Shot blasting of steel board, profile steel, steel structure.
Pre-treatment of cast steel grit:Pre-treatment of surface, steel board, profile steel, steel structure, before-painting.
GP:Angular when new, this grit rapidly rounds off in use and its particularly suited descaling applications.
GL:Although harder then GP steel grit, also loses its sharp edges during shto basting and is particularly suited to descaling and surface preparation applications.
GH:Having maximum hardness, GH always remains angular in its operating mix. These abrasive are particularly effective in surface treatment processes and produce a uniform, etched finish, GH angular grit should only be used in wheel machines where working requirements take precedence over cost price considerations (for example with rolling mill cylinders or when a special finish is needed). For use mainly with compressed air equipment.
目数 |
mm |
铸钢砂规格 mm Specification of Steel Grit mm |
|||||||||
2.5 |
2.0 |
1.7 |
1.4 |
1.2 |
1.0 |
0.7 |
0.4 |
0.3 |
0.2 |
||
7 |
2.80 |
all pass |
|||||||||
8 |
2.36 |
all pass |
|||||||||
10 |
2.00 |
80%min |
all pass |
|
|||||||
12 |
1.70 |
90%min |
80%min |
all pass |
|||||||
13 |
1.40 |
90%min |
80%min |
all pass |
|||||||
16 |
1.18 |
90%min |
75%min |
all pass |
|||||||
18 |
1.00 |
85%min |
75%min |
all pass |
|||||||
20 |
0.850 |
|
|||||||||
25 |
0.710 |
85%min |
70%min |
all pass | |||||||
30 |
0.600 |
|
|||||||||
35 |
0.500 |
80%min | |||||||||
40 |
0.425 |
|
70%min |
all pass |
|
||||||
45 |
0.355 |
||||||||||
50 |
0.300 |
80%min |
65%min |
all pass | |||||||
80 |
0.180 |
75%min |
65%min |
|
|||||||
120 |
0.125 |
75%min |
60%min |
||||||||
200 |
0.075 |
70%min |
|||||||||
325 |
0.045 |
||||||||||
SAE |
G-10 |
G-12 |
G-14 |
G-16 |
G-18 |
G-25 |
G-40 |
G-50 |
G-80 |
G-120 |
Packing Types: braided bag packing,flexible container packing,stock packing,paper bag packing,barrel packing: |
Packaging :
General Packaging:
25kg per bag, 40 bags in one pallet
25kg per bag,40 bags in one jumbo bag
25kg per paper bag,40 bags in one plywood pallet
One ton a bulk bags
According to customer requirements
Shipping:Container transport