F1000 The fluid end assembly mainly consists of fluid end, valve assembly, liner and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F series mud pump are interchangeable. Liner use Bi metal, the sleeve is made of wear resisting cast iron, piston and piston rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extender service life F1000 mud pump are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The power end assembly mainly consists of frame, crankshaft, and pinion shaft, crosshead and extension rod.The fluid end assembly mainly consists of fluid end, valve assembly, liner and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F series mud pump are interchangeable. Liner use Bi metal, the sleeve is made of wear resisting cast iron, piston and piston rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extender service life F1000 mud pump are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The power end assembly mainly consists of frame, crankshaft, and pinion shaft, crosshead and extension rod.The series pump is producted strictly according to API Spec 7K"the Equipment Specification of Well Drilling and Repairing" ,and performed the EX-Work test under the specification thereof.Emsco F-1000 triplex mud pump Technical Specification:Model:F-1000Type:Rated Triplex Single action piston Stroke:140 r/minInput Power:746kwType Gear:Herring boneGear Ratio:4.206:1Diameter of suction pipe:305mmDiameter of Discharge Pipe:126.5mm, 5000psiPinion Gear size:196.8mmKeys:50.75×50.75mmValve Ports:Valve over valve API#6Weight:18780kgLubrication: Pressure &SplashIf you need any items, kindly let us know, we will give you a satisfied quotation.Miss Aily AiInternational Sales ConsultantJinan Tianwei Innovation Oilfield Equipment Enterprise (OEE)Jinding International Trade Development Ltd. (ITD)Skype: oee-AilyMSN: oee-aily(at)hotmail.comE-mail: oee.twcxoil (at) china-ck.com twcxoil(at)china-ck.comWebsite: www.china-ck.comAdd: No.13 shunshi Road, Jinan Shandong, China. Post Code: 250002 TEL: 86-0531-67811566 FAX: 86-0531-67811577
