(1) PEX series Jaw Crusher for stone processing line Description PEX Jaw Crusher /crushing machine is widely used in mining, metallurgy, building material, highway, railway, water conservancy, and chemical industries. PEX Series jaw crusher is always as same as the PE Series Jaw crusher. But the most advantages of the PEX comparing with the PE Series is that: The PEX Series is very suitable to crush the material whose size must less than 300mm. Moreover the final product size is also very small. The Discharging size range is 18-90mm. They are also widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. Various materials with compressive resistance less than 250MPa can be crushed. (2) Working Principle The Jaw Crusher motor transmits power through the belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between moving jaw and toggle plate increases while moving jaw moves up, then the moving jaw closes to the fixed jaw. During this process, the stone stuff will be crushed. (3) Features and Advantages 1. Simple in structure, reliable in operation. 2. Easy to maintain, low cost in keep functioning. 3. Suitable for crushing maximum, medium and minimum stones. 4. The final product is very fine. The discharging size range is 18-90mm Note: Model PEX150*750 refers to the feed opening size 150*750(L*W). This applies to every model PEX jaw crusher. 1) PEX150 x 750 A) Feed opening: 150 x 750 mm B) Max. Feed size: 120mm C) Capacity: 8-25T/h D) Power consumption: 15kW E) Discharge opening: 18- 48mm F) Weight: 3.5T 2) PEX 250 x 750 A) Feed opening: 250 x 750 mm B) Max. Feed size: 210mm C) Capacity: 16-51.2T/h D) Power consumption: 30-37kW E) Discharge opening: 25- 60mm F) Weight: 4.9T 3) PEX250 x 1000 A) Feed opening: 250 x 1000mm B) Max. Feed size: 210mm C) Capacity: 16-51.2T/h D) Power consumption: 30-37kW E) Discharge opening: 25- 60mm F) Weight: 6.5T 4) PEX250 x 1200 A) Feed opening: 250 x 1200mm B) Max. Feed size: 210mm C) Capacity: 20.8-60.8T/h D) Power consumption: 37kW E) Discharge opening: 25- 60mm F) Weight: 7.7T 5) PEX300 x 1300 A) Feed opening: 300 x 1300mm B) Max. Feed size: 250mm C) Capacity: 16-104T/h D) Power consumption: 75kW E) Discharge opening: 20- 90mm F) Weight: 11 T
