Principle The powder raw material and adhensive in a cylinder are mixed fully at the bottom to become a humid soft material. Then it is cut through high-speed crusher and become uniform granules. Features The machine adapts horizontal cylinder structure. Its structure is reasonable; Use air filled seal shaft to drive. When washing it can be changed to water; Use fluidization to Granulate and the granule is near ball. Its flow is good; Compared the traditional process, 25%of adhesive can be reduced and the daying time can be shorted; The time of mixing in dry is 2 minutes and the time of granulating is 1~4 minutes. Compared with the traditional process, 4-5 times of efficiency is raised; In the same sealed container, dry mixing, humidity mixing and granulating can be finished. It is in conformity with the requirements of GMP; The whole operation has strict safe and protective measures
