Asphalt mixing plant (QCS-20) 1) Capacity: 20 tons/h 2) Power: Oil 48kw Coal 70kw 3) Product temperature: 120-180 degree 4) Fuel consumption: Oil: 5~7.5kg/t / Coal: 13~15kg/t 5) Integrated design of drying and batching in drum, reduce initiate cost for customer; 6) Simple structure, easy operation, drying while drum rotate in counter-clockwise direction (from burner), discharging while drum rotates in clockwise direction (from burner), and the wind are swirled in the center of the drum; 7) PLC control, touch screen, auto/manual switchable; 8) Towing chassis for easy transport and installation 9) Burner is available for coal and oil, at customer's option The Describing of the Asphalt Mixing Plant Manufacturing Process: 1) Aggregate is conveyed into its elevator after being weighed. 2) Aggregate Feeding. 3) Aggregate discharged into drying drum. 4) Mineral aggregates are continuously lifted in the drying drum, forming material curtain, and then conducting intensive heat exchange with the flame of the burner. And aggregates are conveyed into the elevator. 5) Hot aggregate discharged to mixer drum. QCS Series adopts filler elevator making filler get into mixer, at the same time bitumen being sprayed into mixer drum. At the same time more aggregate is lifted and discharged into drying drum. 6) Mineral aggregates filler and bitumen are continuously lifted and uniformly mixed in the mixer drum. The drying drum and aggregate `s elevator continuously cycle work. 7) Asphalt Discharge Mixer drum ends mixing after hot mineral aggregates being uniformly bound, finished asphalt is discharged out. 8) The mixer drum will wait for next mixing; 9) If there is the storage silo, finished product material is lifted by its elevator to its storage silo and discharged into the storage silo and then stored. If you need this mobile asphalt mixing plant, pls don't hesitate to contact me.
