KH40 Model Vertical Bottle Washing Machine Main purpose and scope of application The machine is mainly used in the pharmaceutical industry, large-capacity specifications 50-1000 ml bottle of clean washing. The machine automatically complete from the bottle into the outer wall of clear bottles (refined); From the inside (fine) to wash out the bottles, a full set of the production process adopts water-jet cleaning air pressure combination mode is the most popular international, Washing clarity best, Washing clarity high, the low rate of broken bottles. The machine can use stand-alone, but also can comprise of linkage line connected with other single machine. Work and installation conditions Washing water used should be consistent with "" The People's Republic of China Pharmacopoeia "" as defined in the water for injection. Configuration requires water for injection water temperature of 50-60 degrees. The compressed air shall be used degreasing In addition to water purification treatment, pressure is 0.6Mpa. The power supply for the AC380V/50Hz, insulation resistance greater than 1MΩ And have a good grounding. Working environment cleanliness 10000, 18-28 ° C Temperature Relative Humidity 50-60%. Main technical parameters (Test Standard: In the demand-side package material in the production process conditions and operation of proficiency in full compliance with the requirements under the premise of supply-side, normally running test lasting 60mins) A) Specification: 50-1000 ml for the specifications meet the national standard round glass or plastic bottles B) Design maximum capacity: 1000 ml: 100 bottles/min 500 ml: 120 bottles/min 250 ml: 200 bottles/min 100 ml: 230 bottles/min 50 ml: 230 bottles/min C) Broken rate: Bottles washing machine broken rate &le0.02% D) Purified water consumption: 0.2-0.3 Mpa 0.5 m3/h E) Injection of water consumption: 0.2-0.3 Mpa 0.7 m3/h F) Clean compressed air consumption: 0.6Mpa 50 m3/h G) Exhaust (gas) volume: 100 m3/h H) Power: 15.6Kw I) Dimension: 2400X2400X1300mm J) Weight: 3000kg
