Technical Specifications:1. Electrical Specifications:ModelPowerDimension (mm)LED Quantity (pcs)Luminous (Frosted lens)Luminous (Clear Lens)BB-T8106110W26x590(2FT)144900lm±10%1000lm±10%Operation Temperature:-20°C to 50°CStorage Temperature: -20° to 50°Voltage: AC100V---240V Frequency: 60HZ/50HZ Power Factor:>0.85Power supply Efficiency: >92% 2. Photometric Specifications:LED Luminous Efficiency: Up to 100lm/wCRL:Ra: >70CCT: Warm White 2700--3200k, daylight white 4000k—4500k,pure white 5000--5500k,cold white 6500—7000k 3.Mechanical Specifications:◆Beam Angle: 120° ◆Non-isolated power supply ◆Frosted or clear cover available on request◆Weight: 590MM/196g, 1198mm/383.8g, 1498mm/479g◆Can be placed in conventional T8 or T10 fluorescent brackets and replace fluorescent tubes Applications (Civilian Using & Commercial Using) Offices, Hotels, Factories, Shopping Malls, HospitalsResidential/institution buildings Schools, colleges, and universitiesRail Stations & Airports ,museums,galleryEasy InstallationNote: Before installation please make sure the power is turned off.1. When LED tube are replaced in a standard fluorescent tube batten. The starter must be removed, and replaced by the enclosed fuse.Attention: Only suitable for battens with magnetic ballast, not electronic ballast.2. Electronic ballast must be by passed by a registered electrician.Our Package(two options)a. Cylinder rigid box inner package b. Foam package inner package ( less weight than cylinder rigid box, could helpcustomer to save 30% shipping cost)
