RBSiC (SiSiC) Burner Nozzles have superior rapid cooling and rapid heating resistance, wear Resistance, oxidation resistance, high bending strength, no falling slag, no crazing, have a long Time service life, easy to change, effective to control the uniform temperature inside the kilns. RBSiC (SiSiC) Burner Nozzles are widely used in shuttle kilns, tunnel kilns, roller kilns and other fuel Industry kilns. Item Unit Data Temperature of application C 1380 Density g/cm3 >=3.02 Open porosity % < 0.1 Bending strength Mpa 250(20C) Mpa 280(1200C) Modulus of elasticity Gpa 330(20C) Gpa 300(1200C) Thermal conductivity W/m. K 45(1200C) Coefficient of thermal expansion K-1*10-6 4.5 Rigidity 13 Acid-proof alkaline Excellent Usage: Used in tunnel kiln, shuttle kiln, roller hearth kiln and other industrial kiln of gas, fuel oil. 1)Character: High strength, extreme hardness, wear resistance, high temperature tolerance, corrosion resistance, oxidation resistance, thermal shock resistance, high thermal conductivity, low coefficient of thermal expansion, creep resistance under high temperature and so on. 2)Reaction Boned Silicon Carbide(RBSiC or SiSiC) ceramics adopt slip-casting technology. The Ceramics have high strength and excellent hardness, wear, corrosion resistance, oxidization resistance and thermal shock resistance, etc. It's one of the most popular refractory ceramics. It can be made to beams, rollers, cooling air pipes, thermal couple protection tubes, sealing parts and special shaped parts. 3)Reaction Bonded Silicon Carbide Plates are made from high quality SiC powders. They have little deformation at high temperature, low coefficient of thermal expansion, antioxidation and anticorrosion, high strength and so on. Therefore, they can be widely used in all kinds of kilns. 4)SISIC Technical Paramermers