Patent No: 20093016773.2 This machine is designed and researched for the long-distance pipe operation. It is a comprehensive range of precision machine with independent patent that meets various industries requirements. Flange Facer is an internally mounted machine with a durable construction and cover machining sizes range from 50mm up to 2000mm or more. This Facer has a unique power feed long series tool post. The comprehensive design is fully satisfied working conditions on site, with advanced technology to design the hydraulic system loop reasonably. Flange Facer is an internally mounted machine with a durable construction and cover Easy set-up on site and quick adjust concentricity and Flatness, high rigid support frame to assure precision; Facing surface Roughness Ra1.6 micron. Machining sizes range from 50mm up to 2000mm or more. 360 degree power feed tool post for all types of flange facing, groove machining. The axial-radial feed unit of tool post is adjusted It could be changed or combined for the base clamping jaws Hydraulic unit with low heat and low oil consumption. Hydraulic or pneumatic drive, wide use range Technical Parameter: Rated Pressure: P=20Mpa Rated flux: Q=25L/min Hydraulic Motor: N=160r/min Output torque: M=320N. M. Electric Motor Power: N=7.5KW Electric Motor Rate: N=1450r/min Timing range: 0-30r/min
