SKF-28D is for beveling the top-side of plate SKF-28U is for beveling the under-side of plate Operates at 10 feet (3 meters) per minute WITH ADJUSTABLE BEVELLING HEAD TO PRODUCE BEVEL ANGLES 22 1/2° THROUGH 55° AOTAI's SKF-28 & SKF-28U Portable, Self-Propelled Plate Edge Bevellers produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled^ consult factory for details. The SKF-28U ® Bevels the underside of plate eliminating the need to flip the work piece...Reducing time and cost. Savings are further enhanced when both units are used in applications where both sides of the material require beveling. Adjustable Undercarriage...For Easy Height Adjustment The SKF-8® Can be purchased with a adjustable height, self-aligning, spring-loaded caster wheel assembly for self-propelled beveling along any length of plate maintaining a uniform bevel and consistent root face. Undercarriage sold separate Angle Bevel Pins...Enable Bevel Angle Adjustment ...SKF-18® Units are supplied with angle bevel pins for 22 1/2° , 30° , 37 1/2° , 45 ° And 55° Bevels. Pins for other bevel angles are available upon request.
