Products Name:EPT-619D Fuel Pump Test Bench
Packaging:woodcase
Place of Origin:Tai'an Kechuang
Characteristics
�� Changing frequency changing rotation speed;
�� Small fall of rotation speed and large output torque;
�� High measurement precision;
�� The functions of over voltage ,overload and short circuit protection;
�� Ten kinds of rotation speeds presetting;
�� Constant temperature controlled;
�� Ultra low noise;
�� Operating position: arbitrary side of the two work sides of the test stand;
�� Rotation speed, count and temperature are displayed in digits mode, and air pressure is displayed on the mechanical gauge.
�� Built-in air resource.
Functions
�� Measurement of each cylinder��s delivery at various rotation speeds;
�� Checking of each cylinder��s injection time with static state;
�� Checking of the mechanical speed governors;
�� Checking of the electric magnetic valve of distributor pumps;
�� Checking performance of the pneumatic speed governors;
�� Checking of the pressure compensators (LDA) ;
�� Measurement of the reflux delivery of distributor pumps; (May selection)
�� Measurement of the internal pressure of the distributor pumps body.
��Checking of the pneumatic speed governors�� vacuum performance; (May selection) ��Measurement of rack travel; ( May selection)
�� Checking of the sealing of fuel injection pump body .
Technical Parameters
��Adjustable rotation speed range:0~4000r/m;
��Double Series graduates:45cc��150cc;
��Volume of oil tank:60L;
��Temperature stabilization:40��20C:
��Test oil filtering unit:5��;
��D.C.Supply��12v/24v;
��Feed pressure: low:0~0.4Mpa.high:0~4Mpa;
��Air pressure:0~0.3Mpa;
�� 3-phase power supply: 380V/50Hz or on request;
�� Flywheel inertia��s moment: 0.8 Kg.M2;
��Center height: 125 mm;
��Output power: 5.5KW��7.5KW��11KW and 15KW or on request;
�� Overall dimensions(mm): 2370��960��1880��
�� Net weight (KG):1200.
