Pre-bending is available by means of direct pressure from top-roller that can be adjusted in four directions - upwards, downwards, right, left.The movement is figured as above sketch map. 2.Cone-bending function is also available by adjustment of two ends of top roller to make top roller inclinable, so that one end is in low position, another is in high position, with the help of cone-bending device, the machine can carry out cone bending. 3.Of course, the required cone angle can not be reached in one time of operation, it needs some operations through gradual adjustment of the declining angle of top roller.During the operation, workpiece lies on the bottom rollers, the workers do not have to buttress it, so workers are safe and easy to run the machine. 4.The shape of "O", "U", "R"Or combined section shape is also available. 5.The machine is completed with economical PLC control functiono achieve high working efficiency. Main Specification of W11S Model Max.Thickness(mm) Max.Width(mm) TopRoller(mm) BottomRoller(mm) DistanceBottom roller(mm) MainMotor(kw) TravelingMotor(kw) HydraulicMotor(kw) W11S-8X2000 8 2000 245 145 200 5.5 0.75 4 W11S-8X3000 8 3000 280 150 245 7.5 1.1 4 W11S-10X3000 10 3000 255 155 245 7.5 1.1 4 W11S-10X2000 10 2000 268 165 270 7.5 1.5 5.5 W11S-16X2500 16 2500 360 220 360 22 4 7.5 W11S-20X2500 20 2500 380 220 360 22 4 7.5 W11S-25X2000 25 2000 410 235 380 30 4 11 W11S-25X2500 25 2500 410 235 380 30 4 11 W11S-25X4000 25 4000 400 270 420 37 5.5 22 W11S-30X3000 30 3000 425 250 400 37 5.5 11 W11S-40X3000 40 3000 600 340 610 75 11 22 W11S-50X3000 50 3000 600 340 610 75 11 22 Add to Basket
