Model: TM4102 Grinding lubricant: Oil Abrasive belt (piece): 4 Work piece thickness (mm): 0.5-3 Work piece width (mm): 1250 Thickness adjustment (accuracy: 0.01mm): Auto/digital Infeed way: Rolls Infeed speed (m/min): 5-20 Speed of abrasive belt: Constant speed Main features: Centralized operator control panel and display lights of main parts Single or multiple abrasive belts of variable grain patterns adaptable Wide belt heads with fine adjustments and oscillation system Digital table opening read-out Easy exchange of wide belts Double Ridged rubber-coated hold-down rollers for each belt or brush Wet working and cooling style Contact rollers with various diameter or hardness optional Max. Working width include: 600mm; 800mm; 1000mm; 1300mm or others Working length: More than 300mm; Working thickness: 0.5-50mm; Recycled coolant filtration system All the machine components treated with oxide preventive coatings Easy exchange of spray nozzle pipes when maintenance Main applications for this series: One model machine of this series is mainly suitable for more than one of the following uses: 1. Decorative surface grinding or finishing on the stainless steel/aluminum sheet/coil surface, like NO. 4, hairline finish; 2. Oxide removal on laser-cutting steel parts or sheets; 3. Light calibrating or stock removal; 4. Debuting of sheet metal parts; 5. Square tubing and bar stock grinding; 6. Press plate repair grinding; 7. Composite / plastics fine grinding and buffing, rubber sheet grinding and buffing.Model Grinding Lubricant Abrasive Belt(piece) Workpiece Thickness (mm) Working Width (mm) Thickness Adjustment Accuracy: 0.01mm Feed Way Feed Speed (m/min) Speed of Abrasive Belt TM4101(NO.3, NO.4) Oil 2 0.5-3 1250 Auto/digital Rolls 5-20 Frequency Control TM4102(HL) Oil 4 0.5-3 1250 Auto/digital Rolls 5-20 Constant Speed
