| 7M Preparation-Painting and Drying production line of specification : 1.Booth Dimensions - Internal Size(L*B*H) Preparation :7000*4000*2800mm Painting booth :7000*4000*2800mm Drying booth: 7000*5500*2800mm - External Size(L*B*H): 8650*25000*3460mm 2.Foundation and Floor -Loading Capacity of Galvanized Grating :650KG/ wheel, - Surface Area :27M*2 Full Galvanized Grating gills*5unit - Metal Basement:800mm Height should be need to dig foundation - Drive-in Ramps NO Wall and Door - Steel Wall and Roof Panel Double Construction with Insulations EPS 60mm -Thickness with Insulations EPS 50mm 5-Folded Entrance Door With Safety Glass Window 3200*2700 mm (B*H) -3unit -Operators Door With Safety ,Glass Window 800*2000 mm (B*H) 2PCS 3.Lighting - Side Lightings Preparation : 24 Units, each 4*58W, Total 1392W Painting booth : 32 Units, each 4*58W, Total 1856W Drying booth: 4 Units, each 2*58W, Total 464W - Brightness Preparation: >800 Lux, IP54 Grade Painting booth :>1000 Lux, IP54 Grade Drying booth : >300 Lux, IP54 Grade 4.Filtration - Prefilters Fiberglass,Paint-Stop-Filters Plate type duel filters - Ceiling Filters EU5 Fine Filters, 6 Units - Floor Filters Fiberglass, Paint-Stop-Filters Ventilation System 2 Unit Preparation -Direct Drive Motor (Fresh Air):1*5.5KW,970RPM,380V,50HZ motor certificationC -Direct Drive Motor (Exhaust Air) NO - Fan Capacity 18000m*2m/h - Air Flow Speed +/- 0.15m/s Ventilation System 2Unti Painting booth -Direct Drive Motor (Fresh Air):2*7.5KW,970RPM,380V,50HZ motor certificationCE -Direct Drive Motor (Exhaust Air):2*7.5KW,970RPM,380V,50HZ Domestic motor certificationCE - Fan Capacity 25000m*3m/h - Air Flow Speed +/- 0.28m/s in an empty booth Ventilation System 1 Unit Drying booth -Direct Drive Motor (Fresh Air):1*7.5KW,970RPM,380V,50HZ motor certificationCE -Direct Drive Motor (Exhaust Air) NO - Fan Capacity 25000m*3m/h - Air Flow Speed +/- 0.28m/s in an empty booth Heating System 2Unit Painting booth - Heating Exchanger Stainless Steel 1Gr18Ni9Ti -Heating Exchange Capacity 2*200KW(260.000cal/H) RIELLO - Max. Drying Temperature 80 degree - Heating time:3-5 min (from 20 to 60 degree) by Drying Phase Heating System 1Unit Drying booth - Heating Exchanger Stainless Steel 1Gr18Ni9Ti -Heating Exchange Capacity 2*200KW(260.000cal/H) RIELLO - Max. Drying Temperature 80 degree - Heating time:3-5 min (from 20 to 60 degree) by Drying Phase - Heating Type Diesel 6.Control Board - Control system Stander control Delta: Depressurization start system: EN60204-1-2006 - Function:Spraying ,baking, warming spray paint, emergency stop switch - PLC yes - Import element master device import element - Overpressure Manometer yes - Alarm equipment yes | 
