Description: (1)Load coils onto the double head decoiler's expansion system. (2)Start the equipments and feed the material into the flattener manually. (3)The material after flattened is accurately fed into the mechanical puncher for ordinal punching. The accumulated tolerance of the central distance of holes is subject to the feeding system. (4)The front and rear material stores are used to adjust the non synchronization caused by the discontinuous moving in punching. (5)The material after flattened and punched is rolled through the specially designed tooling station by station to form the required shape. (6)At the end of the roll former a rectifying system is mounted to rectify the shape and straightness of the formed product to the final profile. (7)The hydraulic cutter controlled by photoelectric switch and measuring system is used to cut the finished material into required length. (8)The finished products, counted by the PLC automatically, are conveyed to the simple run out table where the workers can take them for package or to the warehouse. Main Configuration and Technical Details The line is mainly consist of one double head decoiler, one flattener, one front material store, one serve feeder, one mechanical puncher, one roll former, one rectifying system, one cutting system, one hydraulic system, one electrical controlling system and one run out table, etc.
