Feeder machine Fatures: 1. High productivity: Suit mult-stage continious product 2. High speed: Reach 600 SPM 3. Universal usage: "Easily adjust different thickness and width 4. Speciality: Specil design for different material property(shapes, surfaces etc. ) 5. Practical and economical with simple mechanism 6. High reliability with easy maintenance All power directly comes from press to save energy cost Depends on feed length and speed of press, the general accuracy is within ± 0.05mm(varied model has varied accuracy). And can be even better up to ± 0.01mm when die have pilot pin to centralize material automatically Type: 1. Single Type: Good for coil material. (thickness above 0.15mm)For make single process or multi-process product 2. Double Type: Good for coil material (thickness under 0.15mm)For make short pitch single process or multi-process product Features: 1. One way clutch Made of tungsten carbide steel on the cintacting surface to keep regidity, precision and durability The gear is hardened to HRC60 and ground to the best transmission accuracy 2. Roller High feed accuracy at exact positioning with hollow roller of less weight and lower inertia Hard chrome plated heat treated to 60 and ground for the best rigidity and durability 3. Disk brake The feed machine Apply the best brake lining to have accuracy, durability, and rigidity.
