1. The Chart of Process Flow Decoiling--active feeding--roll forming--measuring length--cutting to length--product to stand 2. Main Equipment Decoiler, main forming machine, hydraulic cutting, product stand, hydraulic system, electric system. 3. Technical Parameters 1) manual inner tight decoiler(optional) A. Coil inner diameter: 450mm-700mm B. Max width of coiling: 1200mm C. Max weight of loading: 6000kg Automatic inner tight decoiler(optional) A. Coil inner diameter: 450mm-700mm B. Max width of coiling: 1200mm C. Max weight of loading: 6000kg D. Motor power: 3kw E. Hydraulic station power: 3kw F. Oil cylinder inner diamter: 120mm G. Working press: 10Mpa 2) Main forming machine A. Number of forming steps: 9 B. Material of shaft: 45# steel adjustable treatment. Outer diameter: 70mm C. Material of roller: 45# steel D. Main motor power: 3kw E. Forming speed: 5-10m/min F. Stand: 350# steel welding G. The plating chromium of roller surface: 0.05mm 3) Hydraulic cutter A. Material of blade: Cr12 with quenched treatment60-62 B. Cutting system: Adopt advanced hydraulic drive, automatic cut after forming, no distortion, no waste, high safe factor(main motor stops and then cuts) 4. Electrical System 1) Screen display: Text 2) The main computer (PLC): Tai Da DVP14ES 5. Hydraulic System 1) Adopting advanced hydraulic system of Tai Wan 2) Power: 4KW 6. The whole machine consist of: Main forming machine: 1 set; Hydraulic system: 1 set; Electrical system: 1 set.
