Cut To Length line Technical Parameters 1. Technical Parameters 1.1 Types of Material to be processed 1) Suitable raw material: Hot Rolled mild steel 2) Standard of Material: China Standard or Japan(JIS standard) 3) Raw material tensile strength: B≤ 490MPa, s≤ 245MPa 4) Suitable coil thickness: 2.0-12.0 mm(Max) 5) Suitable coil width: 1000mm-1500mm(Max) 6) Suitable coil inner diameter: 762mm 7) Suitable coil outer diameter: ≤ 1800mmMax. 8) Coil weight: 30T(Max. ) 1.2 Finished Strip Format Length: 1000-6000mm Tolerance Average(For Format length of 2000mm) Length Tolerance: ≤ ± 1mm/2m Diagonal Tolerance: ≤ ± 1mm/2m 1.3 Line Parameters 1) Electric Power Source: 440V/60Hz/Three-phase and five-line 2) Production Speed: Up to 15m/min 3) Compressed air: Pressure P=0.4~0.5MPa 4) Total Power: ≈ 105kw 5) Required Floor: ≈ 23m× 9m 6) Working Direction: Left To Right(Face Operating Desk) 7) Operating line elevation height: 800~900mm Add to Basket Other products from this company » Cut To Length Line Slitting and Cut to Length Line Find More Products »
