The line is mainly used to manufacture aluminium stranding wire with big cross section, aluminium stranding wire with steel core, copper stranding wire and insulated strand wire for wire and cable factory. Mechanism is high, auxiliary function is full, content of spool is large, productivity is high, which is the ideal equipment to manufacture all kinds of stranding wires without back-twist.Name Unit Date Stranding material Aluminium, aluminium alloy, copper, insulated wire Total bobbins of equipment bobbin 12+18+24 Single wire dia. mm Cu: 1.2-4; al: : 1.5-5 Strand wire dia. mm 2-5 Section of insulated wire core mm² 1.5-6 Max. Stranding dia. mm Φ 45 Rotation speed of stranding cage r/min 110, 128, 152, 179, 212 Rotation speed rate mm Ψ =1.18 Pitch rate Mm Ψ =1.06 Range of pitch Mm 96-1003 Rotation speed of fix position with low speed for cage r/min 1.58-3.61 Linear speed m/min 20.3-110.3(rated speed of motor) Pay-off bobbins in cage mm PND500 Wires stranding angle < 4 5 ° Take-up angle < 22.5 Capstan dia. mm Φ 1600(double active pulling) Take-up bobbins mm PN1600 PN2000 PN2500 Center pay-off stand stationary Take up creel stand stationary Max. Load bearing of take-up stand ton 12 Specification for the main motor Z4-225-11(90KW, 1000r/min) Specification for fix position motor with low motion YEJ100L2-4-B5(1420r/min, 3KW) Using compressed air pressure(air compressor is prepared by consumer) MPa brake and hanging scaffold device in 0.4-0.7 cage Loading and unloading bobbins loading and unloading separately Total capacity of lading KW About 133 Center height of equipment mm 1000 Outside dimension of machine( L × W × H) cm 41135 × 3600 × 2760
