Five-wheel type continuous casting machine is composed of crystallizing wheel, pressing pulley, tension pulley, guiding wheel, casting ladle, cooling device, steel belt drying device, dust removing and carbon coating device, ingot-picking up device, pulling machine, throttle, pneumatic control system and so on. (The extra automatic casting system can be equipped according to user's requirement). The five-wheel continuous casting machine is produced by the patent technique(Patent No.: ZL00244512.3), which, on one hand, protects casting bars coming from the casting machine from meeting steel belts, so that the bars can be sent into the rolling mill directly without reversing the angles. On the other hand, the crystallizing wheel is of "H" shape, and the cooling methods include controllable inner cooling, outer cooling, side cooling and partly water cooling, and stainless steel is adopted in all the methods. The adjusting valve is equipped respectively in order to automatically control the water flow while casting. The big cooling section and good cooling effect ensure the crystal of smelted copper close and equal while being cast. The five-wheel continuous casting machine has five wheels on the same plane, which is convenient for installation. Level casting can make smelted copper flow to the crystallizing wheel smoothly. There are two casting ladles, and the upper one controls the flow to be cast to the small lower one. The pneumatic steel belt tensioning and mechanical pressing are adopted to ensure the continuously adjustable tension and pressure. Add to Basket
