Specifications(Steel Coil Slitting Line) Hight precision slitting line Design, Manufacture, Install, Commissioning PPGI, CR, HR, GI 0.6-2.5mm Vertical Slitting Machine 1. Technical indexes: 1). Coil requirement: A). Raw materials: Normal hot rolled steel coil B). Quality: Qualified low carbon steel C). Tensile strength: Σ B≤ 440Mpa, σ 0.2≤ 280Mpa D). Thickness: 0.6~~3.0mm E). Width: 400~~1600mm F). Inner diameter: F508mm G). Outer diameter: Max F1600mm 2). Output indexes: A). Inner diameter: F508mm B). Outer diameter: Max F1600mm C). Weight: Max 10T D). Width tolerance: ± 0.05mm (To take the new knife cut the thickness: 0.5mm) E). Narrowest: 30mm F). Max cut partial capacity(horizontal cut): 3 strips(Thickness less than: 3.0mm--cold rolled plate) 11 strips(Thickness less than: 2.0mm--cold rolled plate) 30 strips(Thickness less than: 0.5mm--cold rolled plate) G). To ensure the quality of the finished cutting: The transverse plane between the knife and the knifes spacer pulse should be controlled under: < < 0.005mm. And the gap between the knife inner bore and the main shaft should less: < < 0.05mm. 3) Other Indexes A). Electrical sources: 380V/50Hz/3pH B). Installed capacity: Approx: 180Kw C). Cutting velocity: 0~~120m/min D). Cuting mode: Driven cuting E). Recoil mode: Down coil F). Electrical driven engines: Pinch roll motor: DC15KW Circle shear motor: DC55K
