employing disc cutters, angular cutters, formed cutters and face metal milling cutters. When mounted with the index, the machine will be able to perform milling operations in gears, cutter, helix roove, cam and tub wheel. The logitudinal, cross and vertical movements of the table can both be operated by hand and power, and it can be rapid moved. It has the large working table, a set of cantaever for electric button and a longitudinal handwheel in front of the table, so the machine can be easy to operate. Working table and slide ways adopted quality cast hardened ensure high accuracy.Main specification Units X6142A Worktable size mm 420×1800 T slots (N X W X D) mm 3×18×90 Longitudinal travel of worktable (Manual/Power) X mm 1280/1250 Longitudinal travel of worktable (Manual/Power) Y mm 380/360 Vertical travel of worktable (Manual/Power) Z 470/460 Max. rotary angle of worktable ±45° Feed speed steps 18 The largest power of worktable KN 20 Max. load bearing of worktable Kg 800 Feed speed ranges: Longitudinal X mm/min 22-1100 Cross Y mm/min 22-1100 Vertical Z mm/min 8.3-410 Rapid feed ranges: Longitudinal X mm/min 2400 Cross Y mm/min 2400 Vertical Z mm/min 900 Distance from spindle center to arm mm 155 Arbor diameter mm φ32 φ50 Distance from spindle center to worktable mm 40-510 Spindle hole taper 7:24, NO.50 Spindle speed steps 18 Spindle speed ranges r/min 30~1500 Main motor power Kw 11 Main motor speed 960 Cooling pump power Kw 0.12 Cooling pump speed r/min 2760 Cooling pump capacity L/min 25 Feed motor power Kw 3 Feed motor speed r/min 1420 Overall size mm 2522×2262×2047
