PERFORMANCE EPS Cutting Machine can Horizontal, vertical and cross cutting controlled by three sets of transformers and boosters. Max. 50 cutting wires can be manually set in horizontal direction, and max 6 cutting wires in vertical direction. One wire is used to cut to length; Minimum thickness to be cut is 10mm; Cutting speed controlled by transducer from 0.5-1m/min depending on density and quality of EPS foam. TECHNICAL PARAMETERS Product length 2000-8000mm Motor power 0.55kw Product width 1230mm Booster 10+1+0.5KAV Product thickness 1230mm Transformer 10+1+0.5KAV Minimum thickness 10mm Total Power 11.55kw Cutting speed 0.5-1m/min Voltage 380v 50Hz Max. Cutting wire 55 pieces Add to Basket
