Technical data of W11s-25*2500 Detailed Product Description Upper roller adding pressure 230tons Max width of roll board 2500mm The length of working rolls 2550mm Max thickness of plate 25mm(carbon steel σs≤245Mpa) Max thickness of plate pre-bending 20mm(carbon steel σs≤245Mpa) Up roll diameter Φ800mm Down roll diameter Φ380mm Distance between two down rolls 360mm Support rolls: One group Drive speed about 4.0m/min Hydraulic motor 7.5KW Main motor 22KW Moving motor 4KW Machine weight 14tons Instruction This machine used to make the steel plate into barrel shapeCircular shapeConical sharp, etc. The upper roller can move vertically as well as horizontally, it can finish the pre-bending work and coiling work at the same machine. The upper roller is drum-type design, so it has the anti-deformation function. There is equipped the support rollers under the lower rollers it can help to coil the high precision products. The lower rollers are fixed symmetrically deployed relatively to upper roller, mechanical drive is employed for driving lower rollers. Upper roller ascends or descends at the central symmetric location of the lower rollers; The ascending and descending are hydraulic driven. Upper roller moves to the left or right position to prepare for pre-bending work, the shift position is controlled by the limited switches. The upper roller movement is PLC controlled and LCD display is employed for displacement.
