COLO-660 Electrostatic Powder Coating Equipment, is designed exclusively for electrostatic coating with powder. Typical characteristics: 1, Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts. Easy to operate. 2, suitable for the coating of every workpiece. Simple, flat workpieces; Workpieces with complicated shapes; The over-coating of workpieces which are already coated. 3, Pulse coating system 1). Save powder by 20% compare to Electrostatic Coating, for the average thickness of our products is 60 μ M compare to 70 μ M of the latter. 2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage. 3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine. Configuration: A control unit power supply cable - A air filter - A air pressure regulator - A fluidized powder hopper - A plug-in injector - An manual powder gun with gun cable, powder Hose, rinsing air hose and standard nozzle set. - Pneumatic hoses for conveying air (red), supplementary Air (black) and fluidizing air (black) Powder hose Ground wire Data: A) Control unit Input voltage: 110V-220V Frequency: 50-60Hz Input powder: 50W Pneumatic control voltage: 24V DC B) Compressed air data: Max. Input air pressure: 10bar/145psi Min input air pressure: 6bar/87psi Max water vapour content: 1.3G/nm C) Powder Spray Gun Powder yield: 600g/min Gun powder: 550G Connection cable: 5m Packing Dimensions Model No. COLO-660 Length: 84cm Width: 52cm Height: 68 cm Weight: 37 kgs. Manual coating equipment Function description The powder gun through the powder hose. The powder is electrostatically Charged at the nozzle of the gun. In addition, an electrostatic field is Created between the gun nozzle and the grounded object. The charged Powder spray remains adhered to the surface of the object. The powder is fluidized by air forced through a porous plastic plate from Below. The powder acquires, thereby, fluid-like characteristics. The conveying air, supplementary air, and rinsing air are set on the control Unit. The process of the coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths, ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China. China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit
