1. Two sections type straightening device, it is no need to adjust straighten function when rolled material is under straightening process(from start to end ). To ensure the material at same flatness completely. 2. Fine electric parts can not be finished with high accuracy only good smoothing of coil material may be accomplished. So thin material need to be straightened, and stress moderately removed. 3. After straightening, materials can be curved upward or downward of flat easily. 4. As bearing of work rollers are of oil lubricating free type, there is no troble of the adherence of oil or dirtly. 5. The driving unit is controlled by inverters (cycle control to feed smoothly at a speed synchronized with the press)Model BSL-100 BSL-150 BSL-200 BSL-300 Material width(mm) 100 150 200 300 Material thickness(mm) 0.1-0.5 0.1-0.5 0.1-0.5 0.1-0.5 Straighting speed(m/min) 15 15 15 15 Motor(hp) ½ ½ 1 2 Straightening Rollers Dia and No. 18x9/10(up/down) 18x9/10(up/down) 18x9/10(up/down) 18x9/10(up/down) Machine weight(kgs) 200 250 300 350 Machine size(LxWxH) 0.9x0.3x1.2meter 0.9x0.35x1.2 0.9x0.4x1.2 0.9x0.5x1.2
