Press Force1680 tons
Working Pressure4250psi
Stroke72"
Daylight Open130"
Daylight Closed58"
Distance between column stockings L-R/ F-B102" X 30"
Press Speeds @ 304 GPM, appx.
a) Rapid Planishing at low power = 57 strokes per minute.
b) Pressing with 0.5” penetration = 41 strokes per minute
c) Pressing with 1.0” penetration = 28 strokes per minute
Approximate Weight, PRESS ONLY580,000 lbs
Manufactured1950
Press is capable of cogging or planishing using rapid short strokes to form or change grain structures of materials
EQUIPPED WITH:
Number of pumps 5 ea-Replace in 2005
Pump Make Loewy
Pump Type Horizontal 3 row
Pump stroke 10"
Pump Output each 63.5 US Gallons (total output = 317.5gpm)
Pump Crankshaft Speed 120 rpm
Pump Drive Motors 5 ea @ 230 HP each
Pump motor (on load) speed 730 RPM
Pump Motor Supply Voltage 400v / 3ph / 50 cycle
Air cylinder bank (8 cylinders)
CONDITION: Very Good – Press was used as “back up” unit for two other forging presses. From 2000 to 2005 numerous updates and repairs have been performed to assure the units were in top running order. Pump has been rebuilt and replaced, new controls, new motors, new tracks have been installed. Press being replaced to make room for new equipment.