Forged/Forging round bars(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41). Forged/Forging bar(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Forged/Forging bars(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Forged/Forging shaft(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Forged/Forging shafts(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Forged/Forging parts(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Open die forging parts(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene41, Haynes R-41, Allvac Rene 41) Forgings(Rene 41, UNS N07041, Udimet R41, UDIMET alloy R41, Rene 41, Haynes R-41, Allvac Rene 41) SEamless rolled ring/rolled rings/rolled ring/CONTOURED ROLLED RINGS/CONTOURED ROLLED RING/ Contoured seamless rolled ring/Contoured seamless rolled ring/Steel Rolled Rings/steel forging rings/steel forging ring/steel forged ring/steel forged rings/ring forging/ring forged/ring blank/forging shaft/forged shaft/open die forging parts/forging parts/forged parts/forging tube/forging disks/forging disk/forging tube sheet/forged dics/forged disk/forged valve/forging valve Size: 305x153mm, 500x120mm, 260x300mm etc. Delivery Status: Annealed. Actual tested chemical composition: B: 0.007 Co: 11 Fe: 3.6 Mo: 9.6 Ti: 3.1 Al: 1.63 Cr: 18.5 Ni: Balance P: 0.005 S: 0.002 Mn: 0.06 Si: 0.32 C: 0.083 Se: <0.00001 Pb: 0.0005 Bi: <0.0003 Actual tested Mechanical Properties( Tested from Aged + Solution Test coupons): 1) Room Temperature Mechanical Properties(23° C) Tensile strength: 1340 Mpa Yield strength: 945Mpa Elongation: 24.5% Reduction of area: 23.5% 2) Room Temperature Mechanical Properties(760° C) Tensile strength: 1090 Mpa Yield strength: 900Mpa Elongation: 39% Reduction of area: 40% Grain Size: ASTM No. 3-6 Hardness: 385HB UT: ASTM A 388 PASSED Heat Treatment: 1975F 1HR WQ, 1950F 30MIN. AC, 1400F16HR AC.
