SPECIFICATIONS: GH61100J GH61125J STANDARD EQUIPMENT Swing Over Bed: 1000mm 1250mm 4-jaw 1000mm chuck Swing Over Gap:(GH62100T) -- Follow rest 70~200mm Swing over carriage: 630mm 880mm Revolving center Max. turning length: 1000~10000mm Oil gun Max. weight of workpiece between centers: 6000kg Special tools Width of the bed: 755mm 30 " Center sleeve Spindle noses No.: 1:20 Steady rest 70~600mm Diameter of spindle front bearing: 200mm 8 " Auto travel of carriage Diameter of spindle hole: 100mm 4" Auto travel of cross slide Taper hole of spindle: Metric No.140 OPTIONAL ACCESSORIES Number of spindle speeds: 12 Digital readout device Range of spindle speeds: 6~272rpm 4.25~192rpm Open type steady rest 480~880mm Main motor power: AC 22 KW Auto travel of compound slide Workpiece held on the steady rest 70~480mm Section of tool shank: 45 x 45mm 1.8" x 1.8" Grinder Max. travel of top slide 350mm Rapid moving speed of tool post Longitudinal 1.2m/min Cross 0.6m/min Metric Threads number and range: 46,1~224mm Inch threads number and range: 46,28 ~ 1T.P.I. Modul threads number and range: 37,0.25 ~ 56mm Number and range of longitudinal feeds: 48,0.057 ~ 12.726mm/rev Number and range of transverse feeds: 48,0.027 ~ 6.096mm/rev Diameter of Tailstock Quill: 140mm Taper hole of tailstock Quill: Morse No.6 Travel of tailstock quill: 300mm 12" Weight of the lathe with 3m 11900kg 13000kg Overall dimension(L x W x H)(3m) 6440x2230x2155mm 6440x2230x2280mm
