Specifications: Table size: 1200mm*1500mm Resolution ration: 0.025mm Spindle power: 2.2KW-4.5 KW Working voltage: AC380V or 200V /50Hz or 60Hz Working precision: About 0.04mm Location precision: About 0.05mm Table structure Vacuum adoption X, Y, Z structure Ball screw The speed of open working: : 60m/min Spindle rotating speed: 24000 revolution/min Max speed of working: 25000mm/min Feeding height 120- 200mm(option) The diameter of the knife Φ 6, Φ 12.7 The engraving instruction HPGLG code Knife pressure 0.7Kpa Cleaning power 2.2KW Absorption power 5KW Gross power 20KW Power consumption: 2.8KV Work mode: Stepper Applicable areas: Applicable for advertisement, double face board and scutcheon, department brand, chest brand and the architecture board, ABS brand, the engraving and cutting of acrylic and the engraving of many jade article. Characteristics: 1. This machine is a machine which was published early. It has been tested for many years, it is integrated ceaselessly and perfected usually. It has a large number of customers. 2. It is very stable, reasonable lathe bed. It is stable when working, small inertia, fast processing speed, high precision. 3. It has the high speed water cooled engine, high quality fractionize drive, it can work stable for a ling time. 4. It adopts the advanced data-controlled system, it has the easy operating software, we can check the contrail of the knife, add and delete the depth of the Z axis, adjust the rotate speed. It can work at the convenient and comfortable way.
