Product Description DIN1837 HSS Slitting Saw Blade Materials: HSS-M2 and HSS-M35 Manufacturing process: Fully ground Finish: Bright, tin and TiAIN Thickness: 0.2 to 5.0mm Size: 40 to 250mm HRC: 61 to 65 Tooth form: A, AW, B, BW and Hz Diameter: 200, 225, 275, 300, 315, 325, 350, 370, 380, 400 and 425mm Thickness: 1.2, 1.6, 2.0, 2.5 and 3.0mm Bore diameter: 25.4, 32, 38, 40, 50mm or customer bore size Pin hole size: Bore 32mm: 2 x 8.5 x 45mm + 2 x 12 x 64mm with 2 x 9.0 x 50mm on request Bore 40mm: 2 x 216; 8.0 x 55mm + 4 x 216; 12 x 64mm Bore 50mm: 4 x 216; 15 x 80mm + 4 x 216; 14 x 85mm Special bores and pin holes on request Tin coating Color: Gold Process: PVD Hardness: 2, 500HV Friction: 0.4 Thickness: 1 to 4mm Maximum cutting temperature: 600 degrees Celsius Operation: Structural steel Alloyed steels Steel pipes and profiles Pipes and profiles out non ferrous metals Raising of the coating hardness by reducing the friction Universal coating for better saw blade life 50 to 100% higher speed and feed rates Prevention of side pick-UPS
