1980's
table: 11 x 58"
moissing quil handle and knee lift handles
bridgeport power feed on longitudinal
SPECIFICATIONS:std specs please verify below
WORKING SURFACE OF TABLE ................. 11" X 58"
RANGE:
- LONGITUDINAL ........................... 30"
- CROSS .................................. 15"
VERTICAL (KNEE) .......................... 16"
RAM TRAVEL ............................... 16"
MAXIMUM THROAT DISTANCE .................. 26-5/8"
MINIMUM THROAT DISTANCE .................. 10-5/8"
MAXIMUM TABLE LOAD CAPACITY .............. 1,500 LBS.
SPINDLE SPEEDS, TWO RANGES ............... 50 TO 450 RPM
INFINITELY VARIABLE ...................... 450 TO 3500 RPM
QUILL TRAVEL ............................. 5"
QUILL POWER FEED RANGE ................... .6 TO 2.5 IPM
FEEDS:
- LONGITUDINAL ........................... 3/8 TO 24 IPM
- CROSS .................................. 3/16 TO 12 IPM
RAPID TRAVERSE RATE:
- LONGITUDINAL AND CROSS ................. 24 IPM
- VERTICAL (KNEE) ........................ 12 IPM
TAPER IN SPINDLE ......................... R-8
HEAD TILTS:
- LEFT TO RIGHT .......................... 90 DEG.
- FRONT TO BACK .......................... 30 DEG.
RAM SWIVELS .............................. 360 DEG.
APPROXIMATE WEIGHT ....................... 5,500 LBS.
very little wear on the ways
no knee crank handle or quill handle
Std. power feed unit may need a little TLC..or replaced with a modern unit
Electrical Description
230/460/3 wired 230
Comments:
very nice heavy machine