GR135 XCMG GR Series Motor Grader The XCMG GR Series Motor Graders are mainly used in ground leveling, canalling, slope scraping, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on. They are necessary construction machines for national defense engineering, mine construction, town and country roads building, and farmland improvement... Performance and characteristic 1. New appearance design. 2. The articulation frame is adopted and matched with the steering of the front wheel, With small turning radius, maneuvering and flexible. 3. The electro-hydraulic controls the power shift gearbox, with 6ahead gears and 3 back gears. 4. The international matching hydraulic parts are adopted, with reliable operation. 5. The motions of the blade are fully hydraulically controlled. 6. The rear axle is the three-section driving axle which is provided with the NO-SPIN self-locking differential mechanism. 7. The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved. 8. The cab is grand and nice, with wide eyeshot and good sealing. 9. The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added. GR135 Basic specification Engine model 6BT5.9 Rated power/speed 100/2200kw/rpm Dimension(L*W*H) 8015*2380*3050mm Operating weight(Standard) 11000kg Performance specification Travelling speed ,forward 5,8,13,20,30,42km/h Travelling speed ,reverse 5,13,30km/h Tractive force(f=0.75) 61.3KN Max. gradeability 20% Tire inflation pressure 300kPa Working hydraulic pressure 16MPa Transmission pressure 1.3~1.8MPa Operating specification Max. steering angle of front wheels 49 Max. lean angle of front wheels 17 Max. oscillation angle of front axle 15 Max. oscillation angle of balance box Front and end 16 Frame articulation angle 27 Min. turning radius using articulation 6.6m Biade Maximum lift above ground 410mm Maximum depth of cutting 535mm Maximum blade position angle 90 Blade cutting angle 28-70 Circle reversing rotation 360 Moldboard width X height 3710×610mm
