Introduction of AAC Block/Light Block: Autoclave Aerated Concrete Block (AAC Block) is the light and porous building material. It has the advantages of Light Weight, Keeping Temperature, Heat Resistant, Fireproof, High Intensity, Good Sound Insulation and Machinability, Conveniently Mechanized Construction, etc. AAC Block can be made into many different size of blocks (for example: 600× 200× 100, 600× 200× 125, 80× 80× 180, 240× 115× 53, etc), widely used for industry building and common house building. They are becoming more and more popular in the world, in the near future, they will completely replace the Clay Bricks and Normal Concrete Blocks in building construction. Character of AAC Block/Light Block Cutting Machine: 1. The model structure is simplified practically, the maintenance easy to install; 2. The base body side sets up and puts and makes the width of base body 600mm, the height is 1200mm, cuts the steel wire short, difficult to break, it is difficult to float, it is high to cut the precision; 3. The vertical cutting equipment is regular, cut the small garage and leave and finish cutting vertically, cut time short. Crosscut device adopt steel wire cut under the level, is it cut steel wire length to shorten, guarantee precision of cutting. 4. Base body side can vertical to is it mill trough to finish when cutting after setting up, is it mix notch process the equipment separately to need; 5. Copies of model make to base body six cut, products quality does not out of shape to influence mould oil have; 6. A model can also produce the panel besides producing the building block; 7. Model cut course (upset, vertical cut, crosscut) is it finishes with the Engineer location to divide every engineering location work simplification, operate and maintain it conveniently.
