Sand AAC Block Machiney supplied by HUAWEI company enjoy great popularity in oversea countries! Material Preparation AAC is a steam cured mix of sand or pulverized fuel ash (PFA), cement, lime, water and an aeration agent. Dosing and Mixing Wehrhahn's computerized dosing and mixing plant (WECOMIX) forms a slurry finally poured into a mould. The slurry in the mould rises and stiffens to build a cake with millions of tiny pores. Cutting After the cake has gained sufficient strength it is tilted out of the mould and is cut with wires and knives. Wehrhahn plants are recognized for unsurpassed precise cutting. Tongue and groove, profiles and handholds are cut before autoclaving so that no milling in the hard-cured AAC is required. This reduces production costs and avoids hard scrap Curing The precisely cut cake is autoclaved (steam cured) for approx 12 hours. During steam curing the unique crystal structure of AAC is produced which gives AAC its high strength and dimensional stability. The physical properties in relation to its density are far more advanced than in ordinary concrete. Wehrhahn's automatic autoclave system (WACO) allows easy control of the complicated chemical process in the autoclave. Unloading / Packing Immediatley after autoclaving Wehrhahn's versatile unloading, sorting and packing systems handle the whole range of AAC products. The capacities of Wehrhahn's production plants usually range from 150 to 2000 m³ /day (5.000 to 70.000 ft³ / day).
