1. Engine: 37HP water-cooled electrical starting diesel engine with four-cylinder in-line that is environmental protection with low noise. The fuel tank cubage is 60L. 2. Driving system: Oil pressurized continuously variable speed transmission that can freely go ahead, back off and stop. 3. Driving speed: Forward: 0-22km/h; Back off: 0-12km/h; Maximum capacity: 15° . 4. Paint pump: Double equipped with hydraulic-driven plunger-type spraying pumps. Maximum flow per pump: 20L/min. Maximum spraying pressure: 20Mpa. 5. Paint tank: Single equipped with two-room tank (cubage 500kg/room); Equipped with hydraulic-driven erect vane stirrer. The discharging hole is equipped with filter device that is easy to remove and clean. 6. Spray gun: Equipped with 4 new-type pneumatic spraying guns and 1 manual spraying gun with lengthening pipe with reverse washed nozzle (42/20 or 70/20). The four guns can be started at the same time if construction needs. Spraying width: 100-1000mm. 7. Available paint: Applying to spray cold solvent, water-based and two-component road marking paint. 8. Glass beads spraying system: Option for single or double spray guns if construction needs. Displacement of air compressor: 0.6m3/min. 9. Glass beads bin: Single or double equipped with 200kg capacity bin with windows used to check the quantity of glass beads in the bin timely (the double-equipped can spray beads uninterruptedly. ) 10. Chassis: A firm welded, four-wheel structure with a 500mm inflatable pressure-proof wheel. The operators can operate the machine sitting on the left or right and use the hydraulic steering (designed at the left or right according to users' needs) to freely control directions. The stable brake system makes the driving more secure. 11. Control system: TT-KZ300 PLC micro-electronic control system can freely change the line types such as single or double continuous line and all kinds of broken lines. And the following functions can also be equipped according to the users' needs: Paint volume measuring, line length and area measuring and line thickness reminding to make the marking operation convenient and fast. 12. Gun bracket: Foldable bracket is equal distance to road surface. Spray width can be freely adjusted before or after construction work. 13. Pre-marking system: Pre-marking working Synchronous with the marking operation, greatly improving the construction efficiency. 14. Size & Weight: 5300mm (L) × 1650mm (W) × 2300mm (H). 2500kg. Option for special trailer, convenient for transportation. Option for portable hand-push road marking machine to mark special markings, such as pedestrain crossing, parking line and lane line.
