1. Engine: Imported Honda 20HP air-cooled gasoline engine. The fuel tank capacity is 50L. 2. Driving system: Imported oil pressurized continuously variable speed transmission system (HTS) with automatic brake device. The left and right back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely. Driving speed: 0-22km/m, maximum climbing capacity: 15° . 3. Air compressor: 1m2/min displacement piston air compressor with enough and stable pressurized air. 4. Paint tank: Equipped with single pressurized paint tank with hydraulic driven type stirring device; Capacity: 200L. 5. Spray gun: Equipped with double pneumatic low pressure atomized air spray guns. The spray width is 100-450mm. 6. Available paint: Apply to cold solvent paint and water based paint. 7. Glass beads spraying system: Single equipped with pressurized 60L glass beads bin with a window. Single or double glass beads spraying guns can be equipped on the left or right that can freely adjust its pressure, flow rate and spray width to ensure the spraying glass beads firmer, evener and more economical. 8. Chassis: A firm welded, four-wheel structure with a 500mm inflatable pressure-proof wheel. The operators can operate the machine sitting on the left or right and use the hydraulic steering to freely control directions. The stable brake system makes the driving more secure. 9. Lighting and warning function: The originally equipped highlight headlamp makes the night marking operation more convenient. The warning lights can freely adjust its flicker frequency, greatly improving the marking operations' safety. 10. Electronic control system: Multiple marking standard control modes, realizing the micro-electronic intelligent control, and can adjust the standards according to the customer's needs. 11. Guide rod: Can be freely adjusted to up, down, left and right easy. 12. Size & weight: 3400mm (L) × 2000mm (W) × 2400mm (H). 780Kg
