1. Engine: Japanese Robin or Honda 9.0HP air-cooled gasoline engine. 2. Removal cutter: The down scraping knife-head which are made of imported tungalloy are hard and high speed rotating. The milling drum component parts can be quickly and freely changed according to the different demands of work, which can meet the different width and depth of work. The rotating place adopts sealed bearing, and the shock-reducing design of dentate transmission belt increases the effects and durability of equipment. 3. Functions and features: A. Function of removing marking: Quickly remove the marking such as cold, thermoplastic, tape and so on. B. Clean function: It can remove many kinds of materials such as oil stain, plastics and burnt cicatrice and so on. C. Function of milling and rubdown: Effectively remove the heave of surface of bitumen and concrete. D. Function of surface seam pre-treatment before tedding: Effectively remove the grouting to form a clean work surface seam, so effectively increases the tedding quality of surface seam. 4. Protection device: The machine connects with emergency stop device which effectively ensures the stop of equipment in the condition of out of control in time. 5. Depth adjuster: There is device which is used for adjusting the depth of burnishing in armrest part, which adopts accurate pitch to adjust so as to accurately control the depth of milling-planing according to the needs. 6. Operation way: Single pushing-pulling operation, humanistic design of handle makes the operation easy and comfortable. 7. Milling speed: At normal construction removal speed: 33-46 square meter/h. 8. Wheel: The wheels of whole machine are special abrasion resistant modified rubber wheels. 9. Size & Weight: 900mm (L) × 600mm (W) × 970mm (H). Weight: 90kg.
